7 days to die commands | Latest 7 days to die console commands List

Here you will get information about 7 Days to Die Console Commands. This console command tool is used for game development and increase the level of the game and also character. With the help of this information, you can perform a wider range of functionality in the game.

Console Commands 7 Days to Die is a very useful debugging tool. Using this console commands the player can change game settings, access statistics, ban or kick unnecessary players and also a Control time in the game.

Get the full list of 7 Days to Die Console Commands in our latest post. here you will get each and every commands list which useful in-game, also provide its uses and detail description to understand how to use it.

7 Days to Die Console Command List 2019

7 Days to Die Console Commands generally use the player at the time of playing to make different kind of chance that will help him improve performance and stability in game. Console command is also used to control guest player when you play the multiplayer game.

In the Console Commands 7 Days to Die, You need your attention because we discuss all possible commands which useful in a game. you will all the details like commands, the shortcut of Commands and also information of commands that helps to improve your quality of performance in the game.

Commands & Shortcuts Description
help <command> For supported commands print help text.
admin add <name / entity id / steam id> <permission level> Add the player in Admin list with the desired permission level. Note: you can use players entityid, playername, or steam ID. Type “lpi” to find an ID. The range of Permission level between 0 (maximum) and 1000 (none).
admin remove <name / entity id / steam id> With the help of this command, you can remove a player from the admin list. Type “lpi” to find an ID.
aiddebug Toggles AIDirector debug output.
ban add <name / entity id / steam id> <duration> <duration unit> [reason] This command allow Bans a player from the game for <duration> in <duration units> with a reason of [reason] (optional). Unit durations are minutes, hours, days, weeks, months, and years. Type “lpi” to find an ID.
ban list Command used to print a list of banned players with their ID, duration, and reason to the console.
ban remove <name / entity id / steam id> Can remove a ban and Using “ban list” find a list of banned player IDs.
buff <buff name> Command used to applies a buff to the local player (you) and Using this command buff names are found in 7 Days To Die\Data\Config\buffs.xml
buffplayer <name / entity id / steam id> <buff name> Command used to applies a buff to the selected player. Type “lpi” to find an ID. Using this command buff names are found in 7 Days To Die\Data\Config\buffs.xml
chunkcache (cc) Allow showing all loaded chunks in the cache.
clear Using this command player can clear all output text in the command console
cp add <command> <level> Using this command player can add a command to the command permission list with the desired permission level. Use “cp list” to view commands.
cp remove <command> Remove a command from the command permission list.
cp list It can be used to display a list of current command permissions. 1000 is the lowest guest player while 0 is the highest Admin.
creativemenu (cm) Enables or disables the Creative Menu
deathscreen <on/off> It can be used to display the blood-filled death screen during normal gameplay. Can not allow to hurt or kill the player but it diminishes visibility.
debuff <buff name> Used to remove a buff from the local player (you).
debuffplayer <name / entity id / steam id> <buff name> Used to remove a buff from the targeted player.
debugmenu [on/off] (dm) Toggles Debug Mode on or off.  Used for God mode (G key), the debug menu (ESC), and other unique functionality.
enablescope <on/off> (es) Toggle debug scope.
exhausted Makes the player exhausted.
exportitemicons You can export all item icons to the 7 Days To Die\ItemIcons folder. Useful for wiki editing!
getgamepref (gg) Using this command prints a list of current game preferences to the console (airdrop frequency, daylight length, etc).
getgamestat (ggs) Using this command print a list of current game stats to the console (land claim size, difficulty, etc)
gettime (gt) Prints a current number of days and time.
givequest Using command give yourself a quest. Quest names can be found in 7 Days To Die\Data\onfig\quests.xml. The command can be used to skip to the end of the tutorial quests. This is also immensely helpful for modded quests.
giveself <item name> [quality level] Using command drops an item at your feet with maximum (600) quality. Use the optional [quality level] to specify. The name of items can be found in 7 Days To Die\Data\Config\items.xml.
giveselfskillxp <skill name> <amount> Using command Increase the specified skill by <amount> of experience. The <skill name> must be capitalized and spaced correctly.
giveselfxp <amount> Using command Increase your experience by <amount>.
kick <name / entity id / steam id> [reason] Using Command Kicks a player from the game. Type “lpi” to find an ID. [reason] is optional.
kickall [reason] Using Command Kicks all players from the game. [reason] is optional.
killall Kills all players and entities.
lights Used for toggles display of an outline around all light-emitting objects.
listents (le) The player can check Lists all entities currently in game (zombies, players, animals).
listplayerids (lpi) Lists all players and their IDs.
listplayers (lp) Lists all players with IDs, positions, health, stats, IP address, etc.
listthreads (lt) Lists all threads.
loggamestate <message> [true/false] (lgs) Using this command you can writes information on the current state of the game (memory usage, entities, threads, etc) to the log file at 7 Days To Die\7DaysToDie_Data\output_log.txt. <message> is any string that will be added in the header of the generated log. True = this command runs on the client side. False = this command runs on the server side. “False” is a default.
loglevel <loglevel name> <true/false> Telnet/web only. Can select which types of log messages are shown on the connection. All the log messages are printed on every connection by default. Log levels: INF, WRN, ERR, EXC, or ALL.
mem Allow prints memory information and calls garbage collector.
memcl Allow prints memory information on the client and calls garbage collector.
pplist Allow prints Persistent Player data.
removequest Allow removes a quest. Quest names can be found in 7 Days To Die\Data\Config\quest.xml.
repairchunkdensity <x> <z> [fix] (rcd) This Command is used to check if the densities of blocks in a chunk match the actual block type. If any mismatch found then it can lead to the chunk rendering incorrectly or not at all, indicated by the error message “Failed setting triangles. Some scales are references out of bounds vertices.” It can also fix mismatches within a chunk. <x> and <z> are the coordinates of any block within the chunk to check. If you want to repair any mismathes then you should adding “fix” to the end of the command.
saveworld (sa) Manually saves the world.
say <message> Command Allow sends a server message to all connected clients.
setgamepref <preference name> <value> (sg) Sets a gamepref. Preference names can be viewed with the “gg” command (getgamepref).
setgamestat <stat name> <value> (sgs) Player can set a gamestat. Stat names can be viewed with the “ggs” command (getgamestat).
settempunit <c or f> (stu) Player cansets the temperature unit to Celsius (c) or Fahrenheit (f, default).
settime day
settime night
settime <time>
settime <day> <hour> <minute> (st)
Allow to sets the current game time. <time> is in the 24h/military format (1pm is 1300). [hour] and [minute] are not. You can also set the <day>, which is the number of total days that have passed. Type “help settime” for more info.
showalbedo (albedo) Toggles display of albedo in gBuffer.
showchunkdata (sc) It can show some data on the current chunk.
showclouds This Artist command used to show one layer of clouds.
shownexthordetime Displays the wandering horde time.
shownormals (norms) Toggles display of normal maps in gBuffer.
showspecular (spec) Toggles display of specular values in gBuffer.
shutdown Shut down the game.
sounddebug Toggles SoundManager debug output.
spawnairdrop Spawns an airdrop.
spawnentity <playerID> <entityID> (se) “se” by itself prints a list of entity IDs. Type “lpi” to find an ID. You can also use the Entity Spawner (F6) in Debug Mode to spawn an entity.
spawnscouts Spawns 1 Screamer in the distance and makes it navigate towards the location where the command was used.
spawnscreen Shows spawn screen.
spawnsupplycrate Allow spawns a supply crate above the player.
spawnwanderinghorde Allow spawns a full zombie horde (including many  Screamers) in the distance and makes it navigate on the location where the command was used.
spectrum <choice> Allow force a lighting spectrum. Choices are Biome, BloodMoon, Foggy, Rainy, Stormy, Snowy. For some time, The “biome” choice is bugged and might crash the game.
starve It will make the player hungry.
staticmap Allow switches the Navazgane map between static and dynamic
switchview (sv) Allow switches the player view between 1st person and 3rd person views. Also done in Debug Mode by hitting F5.
systeminfo Show and print info about the current system
teleport <E / W> [y] <N / S>
teleport <E / W> <N / S>
teleport <target player name/steam id/entity id>
teleport offset <inc E / W> <inc y> <inc N / S> (tp)
Teleport the local player (you) on some specified location. If player using [y] (optional) use -1 to spawn on the ground. Use only <E / W> and <N / S> to always spawn on the ground. To teleport based on the current position you have to use “offset”(e.g. 3 meters north inside a locked building). Type “help tp” for more information. Before a Number, South and West are negative.
teleportplayer <name / player id / steam id> <E / W> <y> <N / S>
teleportplayer <player id> <player id> (tele)
Teleport the target player on some specified location. To spawn on the ground you have to use y=-1. You need to use another player’s name or ID to teleport one player to another (such as to yourself). To print, a list of player IDs need to type “lpi”. Type “help tele” for more information. Before a number, South and West are negative.
thirsty Makes the player thirsty.
traderarea Allow to player forced out from trader area but can reenter unless the trader is closed.
updatelighton <name / player id / steam id> Commands for UpdateLightOnAllMaterials and UpdateLightOnPlayers.
version Show and print the version of the game and loaded mods.
water Control water settings. For more info type “help water”.
weather Control weather settings. For more info type “help weather”.
weathersurvival <on / off> Toggles weather survival.
whitelist add <name / player id / steam id> Command Allow to adds a player to the whitelist.
whitelist remove <name / player id / steam id> Command Allow to removes a player from the white list.
whitelist list Allow to prints a list of all whitelisted players.

Conclusion

Glad to give you full information about 7 Days to Die Console commands. Find out the all possible commands which help you at the time playing the game to improve your efficiency, all commands are described here, so you can understand it easily. To know in detail then you should read this article carefully.

If you find any problem regarding this post then you should tell us in a below-mentioned comment box and for more updates kindly visit our official website.

Updated: August 22, 2019 — 6:29 am

Leave a Reply

Your email address will not be published. Required fields are marked *